Airsoft Canada - View Single Post

CDN_Stalker · July 7th, 2012, 13:43

Confusing all to hell as far as reading goes, but will say the APS2 cylinder and bolt handle aren't compatible with the CA M24 without mods.

I'm an expert with the CA M24, but have zero experience with V trigger assembly, just the stock one. If you clarify all you posted above, I might be able to understand better and help you sort it out, but after a few re-reads, still not getting your issue and descriptions (linking rear cylinder issues to problems with your hop up unit?!). BTW, what's wrong with the stock trigger assembly? Set up properly it's great. I see one issue you have is a PDI spring, that's a major problem right there.......

Best off the top of head guess, your retaining screws holding yoru hop up unit to the receiver are causing problems. Inside the cylinder and itself shouldn't cause the hop up problems you are having, unless your new cylinder isn't compatible with the existing hop up unit.

July 7th, 2012, 13:43	#3
CDN_Stalker Official ASC Bladesmith Trader rating Join Date: Jul 2003 Location: Ottawa, Ont.	Confusing all to hell as far as reading goes, but will say the APS2 cylinder and bolt handle aren't compatible with the CA M24 without mods. I'm an expert with the CA M24, but have zero experience with V trigger assembly, just the stock one. If you clarify all you posted above, I might be able to understand better and help you sort it out, but after a few re-reads, still not getting your issue and descriptions (linking rear cylinder issues to problems with your hop up unit?!). BTW, what's wrong with the stock trigger assembly? Set up properly it's great. I see one issue you have is a PDI spring, that's a major problem right there....... Best off the top of head guess, your retaining screws holding yoru hop up unit to the receiver are causing problems. Inside the cylinder and itself shouldn't cause the hop up problems you are having, unless your new cylinder isn't compatible with the existing hop up unit. __________________ STKR Knives http://www.facebook.com/#!/pages/STK...17036668380871 Last edited by CDN_Stalker; July 7th, 2012 at 13:52..