Airsoft Canada - View Single Post - Charge a King Arms 9.6v lipo with X-Charger B6?

Drakker · July 3rd, 2012, 10:41

Woops, I meant to type 0.2a, or 200ma. Should take about 8h to charge a completely discharged 1500mah battery.

Unfortunately, not much info is available on that King Arms battery, all I know is that it's 3.2v per cell. The only type of lithium battery I could find info on that runs at 3.2v is the LiFePo4.

So, I decided to give it a try in my AK (it has an m90 spring). The trigger response is amazing and the ROF is much higher than with a 1500mah 8.4v nimh battery... so the battery works. It was probably already charged, so that could explain why it charged for such a short time in balance mode.

Anyway, I will keep charging it with the LiFe setting on my charger and monitor it very carefully.

Thanks everyone for your inputs!

July 3rd, 2012, 10:41	#9
Drakker Official ASC Geomorphologist Trader rating Join Date: Sep 2009 Location: Montr?al south shore, Qc	Woops, I meant to type 0.2a, or 200ma. Should take about 8h to charge a completely discharged 1500mah battery. Unfortunately, not much info is available on that King Arms battery, all I know is that it's 3.2v per cell. The only type of lithium battery I could find info on that runs at 3.2v is the LiFePo4. So, I decided to give it a try in my AK (it has an m90 spring). The trigger response is amazing and the ROF is much higher than with a 1500mah 8.4v nimh battery... so the battery works. It was probably already charged, so that could explain why it charged for such a short time in balance mode. Anyway, I will keep charging it with the LiFe setting on my charger and monitor it very carefully. Thanks everyone for your inputs! __________________ Keep quiet. Sound travels faster than BBs. Québec province's master age verification representative.