Quote:
Originally Posted by L473ncy
I have that exact chamber. Haven't tested it just yet but I found that the blue bucking was slightly long and I couldn't get the "C-clip" in. Basically I had to take a hobby knife and carefully cut part of the bucking off so I could mount the "C clip".
|
Data point: I had to do the same thing.
By the way, if you haven't tested it yet, I recommend dropping a BB into the unit and checking to see if it takes a lot of force to push the BB through the bucking lips. On any bucking I try with this unit, the required force is very high. I'm wondering if you might have similar or dissimilar results. I still haven't had time to take a Dremel to mine, but heard on ASM that that solution can work.