Quote:
Originally Posted by Scopedog
According to how the number of amps delivered are calculated with your current battery, you're discharging at a whopping 64amps.
|
The amperage in the motor is determined by draw, not by how much amperage the battery is capable of supplying.
You can run an airsoft gun off 80C 20,000mah battery as long as it's 2S or 3S
The overheating problem you're encountering is a common one with active braking SW-COMPs.
The active braking creates a LOT of heat in the motor, especially due to the fact you're using an 11.1v LiPo.
Quick consecutive semi-auto is actually creating more heat than full auto due to the increased frequency of braking.
I had the same problem on my M4 with a systema magnum motor. I couldn't get more than 30 rounds out before it gave me an overheat warning.
The solution for me was to use a really good motor. It took an eagle force EF1300 to get my M249 running without overheating. And I went through 3 motors on my M4 because the active braking kept damaging them.
You could probably send your motor in to get balanced, get the spring tension adjusted, and put better brushes in.