Airsoft Canada - View Single Post

QKLee11 · February 25th, 2012, 19:28

Let me 1rst start off, I should of did my research on SRC products before buying this. I bought this AEG because I saw it could handle LIPO Batteries. Since I owned KWA AEG's I thought this would work out.

Boy was I wrong, I bought he SRC H&K 416 for $540 plus $60 for shipping. I have to admit Ken was able to mail his product to me quite quickly. When I got it I liked the outside externals (railing system), the only thing I didn't like was the constante noice of the outside bolt catch and the rear apareture iron site (loose).

I noted when I fired it the pistol grip would heat up. I contact Ken about this and he said it wouldn't be a problem.

I only fired 800 bb's out of it and the internals crashed. The piston was chewed to shit. This gun broke down on OP Rhino. I thought it would be a an easy fix. Not a chance, I have to admit 007 Airsoft sent me a new mech box. This didn't remedy the problem. Upon further investigation we found the body pins didn't fit properly and the new mech box piston was a "cheap nylon" piston like the before.

I took the AEG Toronto Airsoft (Velocity Arms). Turok put in alot of labour to get this AEG ready. The Motor had to be replaced, the gears were replaced and the electric switch. I put a Quantum Piston inside it and new Taiya contacts had to be put in it. Not to mention the 2 body pins were replaced as well as the mech box pin.

This gun now operates effeciently right now. I have just recently fire 600 bb's through it. The only thing I wished I would have done is that the wiring is cheap and should have had it changed out.

Total cost another $190. The gun I would not sell to anyone because of the problems. I will not know the true performance until I run it on a 24 hour MILSIM.

I for one would not reccomend to anyone to buy SRC Products.

February 25th, 2012, 19:28	#1
QKLee11 Trader rating Join Date: Jan 2009 Location: Toronto	007 Airsoft SRC H&k 416 Let me 1rst start off, I should of did my research on SRC products before buying this. I bought this AEG because I saw it could handle LIPO Batteries. Since I owned KWA AEG's I thought this would work out. Boy was I wrong, I bought he SRC H&K 416 for $540 plus $60 for shipping. I have to admit Ken was able to mail his product to me quite quickly. When I got it I liked the outside externals (railing system), the only thing I didn't like was the constante noice of the outside bolt catch and the rear apareture iron site (loose). I noted when I fired it the pistol grip would heat up. I contact Ken about this and he said it wouldn't be a problem. I only fired 800 bb's out of it and the internals crashed. The piston was chewed to shit. This gun broke down on OP Rhino. I thought it would be a an easy fix. Not a chance, I have to admit 007 Airsoft sent me a new mech box. This didn't remedy the problem. Upon further investigation we found the body pins didn't fit properly and the new mech box piston was a "cheap nylon" piston like the before. I took the AEG Toronto Airsoft (Velocity Arms). Turok put in alot of labour to get this AEG ready. The Motor had to be replaced, the gears were replaced and the electric switch. I put a Quantum Piston inside it and new Taiya contacts had to be put in it. Not to mention the 2 body pins were replaced as well as the mech box pin. This gun now operates effeciently right now. I have just recently fire 600 bb's through it. The only thing I wished I would have done is that the wiring is cheap and should have had it changed out. Total cost another $190. The gun I would not sell to anyone because of the problems. I will not know the true performance until I run it on a 24 hour MILSIM. I for one would not reccomend to anyone to buy SRC Products.