Quote:
Originally Posted by Foxer2373
CA M24 550$ + 700 in parts great gun but heavy and cumbersome
TM Vsr10 Hard to find 400-800$ + 1000$ in parts and you have a laser rifle that will touch 300-350ft no wind.
Maruzen L96 400-800$ gas +400 parts and you will have a rifle that can shoot at 650fps and shoot a football field and further.
|
Where do you get your prices???
VSR-10 is around 450$ BNIB... and it takes EXACTLY the same upgrades as any other BA... complete package would be around 500$... for a grand totalof 1000$
CA M24 is a monster rifle, harder to find but reliable when done. Takes most ASP2 parts... usually runs for about 650$ for the rifle, but you can find some for 800-900$ with most upgrades in the classifieds. It's one of the oldest BAR models on the market still.
Maruzen APS-2 Type 96 is not gas operated. It cost about 600$ for a new one and takes only a few minor upgrades to make it worth while... The stock trigger system is very effective when you keep it under 450 fps, don't even need to change any sears. Stock cylinder is nice and basically you only need a new hop-up (PDI) barrel (Prom M14 6.03 in 500mm), piston (Modify 3-pieces is way nice), piston head (Prom red of Modify) and spring/guide (Laylay makes a nice bearing one with both 7mm and 9mm guide rods...)
The ASR CAN be a good rifle. But fitting the upgrades are random and can either be easy or painfull. That is because the tolerences are way off (the allowed margin in parts dimentions). Stock parts are made looser, so they fit. Upgrades parts are made to be tight with the "quality" brands, so it's hit or miss.