Quote:
Originally Posted by Amos
How tight are you guys putting the screw in?
I install roughly 5+ of these kits a week and I've never had this happen... however, I've noticed that if you over tighten the piston head screw, the screw will protrude a little bit and push the sorbothane tablet out from the back...
|
Personally, I never over tighten piston heads. I finger tighten plus a quarter turn and that's it. I depend on the loctite to hold it firm and not torque. So it's the adhesive that ARS uses that's the problem. Plus the oil/grease that we use could also be the issue.