Quote:
Originally Posted by Drake
Like Green Synergy said, make sure your trigger assembly is assembled correctly.
Was it shooting ok before?
|
It was shooting fine before. I'm pretty sure I assembled it properly. I followed
this guide
Quote:
Originally Posted by HKGhost
If the hammer is causing the slide to get stuck in the back stroke, it's your sear that is worn. The sear isn't engaging the hammer properly so the hammer doesn't go back as far as it should. Replace the sear and see what happens.
|
Any way I can repair the sear with some JB Weld? I don't really want to replace something that I'm not certain that is causing the problem