[slink182]

Description: the AEG does not fire when battery is installed and trigger pulled. To be specific, it does not do ANYTHING - no power appears to be passing through to the motor at all. Pull trigger and... nothing happens. No noise whatsoever.

What I've done so far:
- Installed a different battery. Same outcome.
- Checked the fuse - appears ok. (miniblade type)
- Bypassed fuse and attempted to fire. Nothing.
- Thought that I might have some bad wiring in the stock (this is a vfc scar-l). Ran a bypass directly to receiver's electrical contact points and attempt to fire. Nothing.

Options:
I'm stumped. I suppose I can pull the motor and mechbox out and start troubleshooting each part individually. Another possibility might be the trigger mechanism, but I can't see it being shorted if the fuse is still intact.

Any ideas...? :?

And, thanks in advance.