Airsoft Canada - View Single Post

Schlyder · May 14th, 2011, 20:53

Hahahahaha Thanks for the shout out. That's me on Arnie's (IronOverlord)
Good review. It was nice to see what's inside for parts. I haven't opened up the gear box as it's been shooting great.
Mine seems to group a lot tighter.
I was surprised about the airseal. What kind of FPS were you getting? Was it consistent?
Mine is shooting 380-390 consistently. Maybe yours was made on a friday, and that's why a few things are a bit off :P

a couple of other things...

- The serial numbers are unique.... my 552 is 2201

- You can get an 8.4v mini nanchuk battery in it....here's a link to a thread I made for a mod to fit an 8.4v mini NiMH battery.

http://www.airsoftcanada.com/showthr...52+battery+mod

- I put a piece of black vinyl (cut from a black 3 ring binder) in the top half of handguard so you can't see the battery and wires through the holes.. It is just a rectangle of it, and it's just placed in loose in the handguard.

here is also a review I did here for the G&G SIG550

http://www.airsoftcanada.com/showthread.php?t=93112

You can see the 550 is exactly like the 552 except for the obvious length of the front end. The 550 doesn't have the SIG or the + Swiss shield, for the trades on the top of the receiver. I don't know if you removed the top rail yet... but it has the Swiss cross on the front like the real steel also has.

- Don't worry too much about babying the buttstock. I find it is very solid. It can take getting slapped open.
again good job with the review.

- TM lowcaps work flawlessly in them, and MAG brand mags work too... after they get modded a bit. (they need a light filing on the front mag lip.)
There is also a thread here on ASC about it... I think TaroBear may have started it?

Again good video review. And don't worry about your English. It was just fine.

May 14th, 2011, 20:53	#10
Schlyder IronOverlord Trader rating Join Date: Aug 2008 Location: Broadview,Saskatchewan	Hahahahaha Thanks for the shout out. That's me on Arnie's (IronOverlord) Good review. It was nice to see what's inside for parts. I haven't opened up the gear box as it's been shooting great. Mine seems to group a lot tighter. I was surprised about the airseal. What kind of FPS were you getting? Was it consistent? Mine is shooting 380-390 consistently. Maybe yours was made on a friday, and that's why a few things are a bit off :P a couple of other things... - The serial numbers are unique.... my 552 is 2201 - You can get an 8.4v mini nanchuk battery in it....here's a link to a thread I made for a mod to fit an 8.4v mini NiMH battery. http://www.airsoftcanada.com/showthr...52+battery+mod - I put a piece of black vinyl (cut from a black 3 ring binder) in the top half of handguard so you can't see the battery and wires through the holes.. It is just a rectangle of it, and it's just placed in loose in the handguard. here is also a review I did here for the G&G SIG550 http://www.airsoftcanada.com/showthread.php?t=93112 You can see the 550 is exactly like the 552 except for the obvious length of the front end. The 550 doesn't have the SIG or the + Swiss shield, for the trades on the top of the receiver. I don't know if you removed the top rail yet... but it has the Swiss cross on the front like the real steel also has. - Don't worry too much about babying the buttstock. I find it is very solid. It can take getting slapped open. again good job with the review. - TM lowcaps work flawlessly in them, and MAG brand mags work too... after they get modded a bit. (they need a light filing on the front mag lip.) There is also a thread here on ASC about it... I think TaroBear may have started it? Again good video review. And don't worry about your English. It was just fine. __________________ Last edited by Schlyder; May 14th, 2011 at 22:05..