Quote:
Originally Posted by StrikeFreedom
Be careful of the angle you file down, cause the disconnector may actually slip down upon a trigger pull. This is why I prefer to create room by shortening the trigger bow, and is totally reversible. 
And yes a video of your new problem would help. |
Agreed. You don't need to create a ramp all the way up. Just a very slight angle to smooth the edge so that the disconnector has room to get behind. The spring power will do the rest of the work to get it up behind the sear.
Quote:
Originally Posted by Gunmage
If i increase the strength, it just makes it impossible to pull the trigger at all. But ill try what you said and post a video
|
Why is it impossible?