Quote:
Originally Posted by Conker
Yes
Yes
Yes, in the barrel tip
There's a rubber insert, works no problem with said variations
Not really... inside it works, but outside only if it's dark
Very good. Adjust your sights to this, then adjust the hopup to your sights. Keep in mind that if you're using it at a short distance, keep your red dot/cross/whatever higher than the target distance.
|
Actually you use this indoors to get a rough zero with your scope/sights, then at the field adjust the hop up as needed based upon temp and BB weight, then tweak the sights after that. But close enough.
I have the RS version of this, it works very well, but found the most consistant I could get it was with the rotary switch facing up, if you plug it in, turn the laser on, you'll see the laser doing circles. Keep the switch at 12 O'Clock, that should put you on paper at almost any reasonable distance.