PGC Delta Elite / Mk4 s80 silver kit looks a bit white-ish under bright light,
that time I felt like buying a plain white MBK
It's totally different from SD Delta Elite slide for WA I owned long time ago which had more 'silver characteristics' than the PGC one.
I don't know about the newer PGC ones like silver warrior kit, but from what I've seen from pics on the net, it seems more silver to me.
Frame fitment was O.K, need to file stock leaf spring about 0.6 mm off the width, sanding slide stop hole and mag release hole a bit (it will vary depending on aftermarket cosmetic parts you use, I suppose).
Inner frame installment is a drop-in fit as long as you align them correctly, and the kit includes a screw to lock the Inner frame on to the slide (the stock marui screw is longer, this one is shorter)
The Thumb safety strangely fits in without any wiggle (that wiggle is when you fit / disassemble the stock grip safety from a stock frame),
and what I don't like is when you switch to safety position, it is much more loose than, say, stock TM.
The MSH fitment (i'm using stock TM MSH) is very tight, which I think is great! Don't need to file anything here.
Problem came along when you install the grip bushing set that came with the kit. They (yes, all four of them) will block the magazine inside the frame so you need to trim the bushings height about 1.5mm to have the magazine properly inserted inside.
I don't know what was their purpose of having overlengthed bushings, when all they do is blocking the magazine insertion.
So all in all, I like the pgc/pro-win kit for my TM.
P.S : I haven't fit in the slide yet, hopefully there's not much problems in the process.
Also props for iLLusion for the detonics trigger compatibility as I had it to replace the stock trigger 