|
The parts will fit but...
The bore-up cylinder set requires the bore-up v-trigger. You will also have to remove the two guide rings in your reciever for the bore-up cylinder to fit (no biggie).
You will need a 13mm spring with the PDI cylinder kits. I cannot tell from that link if that spring is 13mm or 11mm.
If you use a 500mm or less inner barrel, a regular bore cylinder kit will be fine. Any more than that and a bore-up kit is suggested.
The parts should last a long time with a 140 spring... or even more for that matter.
Ive imported a number of the kits, trigger and springs. Never an issue.
|