|
second way i did this was i bought an external AEG barrel setup and modded my kjw internals to fit a D-boys 6'' external...worked great with a little elbow grease and a dremel tool lol...
third try i was going for a tightbore internal setup...this kinda took alittle more skill and patience...i completely removed the intrnals of the barrel assembly of the kjw...keeping parts #3,4,20,partial of 21,22,and finally a partial part of B6...
this can all be avoided by doing a dropin using thin metal tape...just simply remove inner barrel assembly and with a hacksaw and file, precisely cut the portion of the barrel with the hopup assembly on both the tight bore and factory inners...after so u will use a small length of tape to fill the gap between the outter and inner....this works very well with the tanio koba m1 twist barrels...i run both my markers with twists...
|