Airsoft Canada - View Single Post

Sportco · January 23rd, 2011, 17:17

Do what kosmos said... then...

if you have the infinity motor... unless you want to go to a M120 spring you can keep it
if you want to go to M120 go with the turbo 3000 ics motor (sounds a bit loud but very sturdy unit and NO gear match problems.

Dont mess with the hopup on an ICS it's probably one of the strongest features of this aeg ((need there be... just replace with stock ics parts))

The upper gearbox can use an internal blueprinting/polishing job (makes the unit operate smoother, cycle a bit faster and shoot about 15 fps faster

I find the 11.1v lipo a bit agressive for the split gearbox design but bare in mind if you go that way you need to install a mosfet switch

the secret to a reliable ICS is preparation and maintenance... not mods

TM style M4 gearbox take a long time to dismentale and clean (thats why people dont do it) on the other and you can teardown/clean and reassemble an ICS upper gearbox in under 25 minutes.

That gun is a charm to keep up and when properly maintained will give you a long trouble free service life

Cheers

Pete

January 23rd, 2011, 17:17	#22
Sportco would-be wine thief Trader rating Join Date: Dec 2009 Location: St-Hilaire	Do what kosmos said... then... if you have the infinity motor... unless you want to go to a M120 spring you can keep it if you want to go to M120 go with the turbo 3000 ics motor (sounds a bit loud but very sturdy unit and NO gear match problems. Dont mess with the hopup on an ICS it's probably one of the strongest features of this aeg ((need there be... just replace with stock ics parts)) The upper gearbox can use an internal blueprinting/polishing job (makes the unit operate smoother, cycle a bit faster and shoot about 15 fps faster I find the 11.1v lipo a bit agressive for the split gearbox design but bare in mind if you go that way you need to install a mosfet switch the secret to a reliable ICS is preparation and maintenance... not mods TM style M4 gearbox take a long time to dismentale and clean (thats why people dont do it) on the other and you can teardown/clean and reassemble an ICS upper gearbox in under 25 minutes. That gun is a charm to keep up and when properly maintained will give you a long trouble free service life Cheers Pete __________________ Level 3 Directory assistance operator Level 1 skapegoat It ain't the years, it's the miles.