Airsoft Canada - View Single Post - vsr 10 power loss and problems please help??:((

AoiShikaku · January 9th, 2011, 02:14

Sorry to say it, but these guys do have a point. Shit gun.. shit parts... and no one really wants to work on it. Bringing this in to a gun doc will be a waste of time and money. Consider this gun to be your learning curve gun for when you do get AV and get yourself a proper VSR-10

Power should be straight in the cylinder.

- O-Rings replacement on piston and cylinder head (if it has one)
- If the spring is crap just get a replacement
- Cylinder head seal

Aside from that it could be the placement of the outer barrel. Too far in could be pushing the BB too far into the barrel when loading.. too far out and you won't get a good enough seal from the hopup rubber. Could also be your hopup rubber has gone to shit.

I can't think of anything else at the moment... so I guess that's what you could try.

January 9th, 2011, 02:14	#11
AoiShikaku Trader rating Join Date: Nov 2010 Location: Toronto, Ont.	Sorry to say it, but these guys do have a point. Shit gun.. shit parts... and no one really wants to work on it. Bringing this in to a gun doc will be a waste of time and money. Consider this gun to be your learning curve gun for when you do get AV and get yourself a proper VSR-10 Power should be straight in the cylinder. - O-Rings replacement on piston and cylinder head (if it has one) - If the spring is crap just get a replacement - Cylinder head seal Aside from that it could be the placement of the outer barrel. Too far in could be pushing the BB too far into the barrel when loading.. too far out and you won't get a good enough seal from the hopup rubber. Could also be your hopup rubber has gone to shit. I can't think of anything else at the moment... so I guess that's what you could try. __________________ ... Just call me Blue ... Last edited by AoiShikaku; January 9th, 2011 at 02:53..