Airsoft Canada - View Single Post

AoiShikaku · January 7th, 2011, 01:27

You ever thought or using an external battery unit for your gun? They look like laser attachments but are hollowed out. You can buy some copper wires and extend the length of your connector from the base of the stock that meets the receiver. Also the connector plug in that area us also the same plug as the one used to plug your crane stock battery into.

If you want to use the existing batteries you have (you don't need to buy new ones) just break the plastic part that hold the batteries into that triangle formation and lay them out flat for the external battery housing.

If you want to hollow out a magpul stock to put your batteries in you'll have to wait till someone else gets back you on that. I'm not familiar with magpul stocks yet.

January 7th, 2011, 01:27	#2
AoiShikaku Trader rating Join Date: Nov 2010 Location: Toronto, Ont.	You ever thought or using an external battery unit for your gun? They look like laser attachments but are hollowed out. You can buy some copper wires and extend the length of your connector from the base of the stock that meets the receiver. Also the connector plug in that area us also the same plug as the one used to plug your crane stock battery into. If you want to use the existing batteries you have (you don't need to buy new ones) just break the plastic part that hold the batteries into that triangle formation and lay them out flat for the external battery housing. If you want to hollow out a magpul stock to put your batteries in you'll have to wait till someone else gets back you on that. I'm not familiar with magpul stocks yet. __________________ ... Just call me Blue ...