Airsoft Canada - View Single Post

L9OBL · December 20th, 2010, 20:22

I've been building myself an m4 AEG from scratch using new parts and some i've stolen from a couple busted AEG's of mine and finally got it done. Low and behold the motor I pulled from my AR15 isn't strong enough for the new gun. The AR15 clocked in at 380fps at 11RDS/s (well 11.4) and im using an element 110 (or something), rated at 400fps give or take the standard variations. So I was going to use the "golden eagle super high power" motor from the AR15 until I had the money for new high torque gears and a new motor and suck up the low ROF but im guessing the spring clocks in at a velocity higher than posted (probably one of the rarer high velocity variations i guess) as the motor won't pull the spring (and I have done upgrades with power gaps like this and not replaced the motor untill the cutomer had the money hell I've done one from 370fps to 410fps didn't shoot w/ a high ROF but it worked till he could replace the motor). As I don't have the money for both new gears and a new motor (and I have high torques [theyre only on the lower torque up end but they'll do] in the gearbox already) im getting a new motor my only problem is should I go with the systema A-Z motor or the G&P M170 i'm leaning towards the systema one but i've herd good things about the G&P so im going to see what you guys think.

December 20th, 2010, 20:22	#1
L9OBL Trader rating Join Date: Mar 2010 Location: London, Ontario	Systema or G&P I've been building myself an m4 AEG from scratch using new parts and some i've stolen from a couple busted AEG's of mine and finally got it done. Low and behold the motor I pulled from my AR15 isn't strong enough for the new gun. The AR15 clocked in at 380fps at 11RDS/s (well 11.4) and im using an element 110 (or something), rated at 400fps give or take the standard variations. So I was going to use the "golden eagle super high power" motor from the AR15 until I had the money for new high torque gears and a new motor and suck up the low ROF but im guessing the spring clocks in at a velocity higher than posted (probably one of the rarer high velocity variations i guess) as the motor won't pull the spring (and I have done upgrades with power gaps like this and not replaced the motor untill the cutomer had the money hell I've done one from 370fps to 410fps didn't shoot w/ a high ROF but it worked till he could replace the motor). As I don't have the money for both new gears and a new motor (and I have high torques [theyre only on the lower torque up end but they'll do] in the gearbox already) im getting a new motor my only problem is should I go with the systema A-Z motor or the G&P M170 i'm leaning towards the systema one but i've herd good things about the G&P so im going to see what you guys think.