Airsoft Canada - View Single Post - Warning to others not to make my mistake with an M14 Gear Box

Jackarutu · November 14th, 2010, 21:51

Kos-Mos,

Thank you for the info.

So according to your info if I understand it correctly
TM
Cyma
ECHO1
Kart
A&K
AGM
All use the same gear box and everything in the gearbox.

Thus, Modify’s M14 cylinder Kit is made to fit the TM M14 and will fit all those listed above?

If that is true then any idea what gearbox I have? Because the Modify Cylinder is too long and too big in diameter to fit in the gearbox I have. And the Gearbox I have is a TM look alike. The Gearbox I have is not a G&G/CA type. I also have a G&G M14 gear box in my shop so I have it for comparison and have not made that mistake.

November 14th, 2010, 21:51	#4
Jackarutu Trader rating Join Date: Sep 2009 Location: louisiana	Kos-Mos, Thank you for the info. So according to your info if I understand it correctly TM Cyma ECHO1 Kart A&K AGM All use the same gear box and everything in the gearbox. Thus, Modify’s M14 cylinder Kit is made to fit the TM M14 and will fit all those listed above? If that is true then any idea what gearbox I have? Because the Modify Cylinder is too long and too big in diameter to fit in the gearbox I have. And the Gearbox I have is a TM look alike. The Gearbox I have is not a G&G/CA type. I also have a G&G M14 gear box in my shop so I have it for comparison and have not made that mistake. __________________ I must not fear. Fear is the mind-killer. Fear is the little-death that brings total obliteration. I will face my fear. I will permit it to pass over me and through me.