|
full stock help
I have had 0 experience with full stocks on guns so this might be a very simple fix to an issue.
I have an ICS M16 full stock with mounting screw BUT all the receivers I have tried to mount this to have been a no go.
The screw is not long enough to reach the mechbox to secure it.
So my questions are;
1.Will ICS stocks only fit on ICS receivers
2.Am I missing something that might need to get to make this work (other then the stock itself, the screw it came with, the a lower)
3.Is it just that I need a longer screw and if so where can you get these.
Oh and the screw seems to only reach about an inch into the back of the receiver tube that the old buffer tube was mounted on.
Thanks for any input
|