Airsoft Canada - View Single Post

jamuke · November 6th, 2010, 02:16

I would suggest you stay away from an enhanced hammer spring, I firmly beleive it caused 2 of my blow back units to crack with wear( the part is called a piston housing in G17 parlance )and is impossible to find

Find a slide that is nice and light,and get the slide and outer barrel as a set. I'd not suggest Guarder as their tolerances are prettty loose.

Though other guarder parts like the trigger bar and mag catches and slide catch worked very well for me. The guarder hogue grip was also a winner in my books.

A tightbore inner barrel ( I had a PDI 6.01) is probably the single best improvement in performance.

It will increase some FPS and improve accuracy. mine shot lazer straight to the sights when hop was properly adjusted

November 6th, 2010, 02:16	#4
jamuke Trader rating Join Date: Dec 2008 Location: Trono	I would suggest you stay away from an enhanced hammer spring, I firmly beleive it caused 2 of my blow back units to crack with wear( the part is called a piston housing in G17 parlance )and is impossible to find Find a slide that is nice and light,and get the slide and outer barrel as a set. I'd not suggest Guarder as their tolerances are prettty loose. Though other guarder parts like the trigger bar and mag catches and slide catch worked very well for me. The guarder hogue grip was also a winner in my books. A tightbore inner barrel ( I had a PDI 6.01) is probably the single best improvement in performance. It will increase some FPS and improve accuracy. mine shot lazer straight to the sights when hop was properly adjusted __________________ Last edited by jamuke; November 6th, 2010 at 02:20..