|
I'll take it apart soon and carefully inspect it again. I've taken apart V3 mechboxes many times before and didnt notice ANYTHING missing or out of place. all springs are where they should be. Connections were not bent and were very clean after I cleaned it. will try bending the bars very slightly to make better contact...
Basically it feels like it only makes contact at the very end of the trigger pull. Trigger pulls fine like normal but its like I have to push it further than it should travel to get a contact.
btw right now the gun is not firing at all. fired a shot semi and then nothing worked after. This occurs sometimes in semi-auto but afaik thats normal in aeg's. Still, I suspect cut-off lever is screwing up.
|