Airsoft Canada - View Single Post

ybrik · October 11th, 2010, 16:15

Actually it's much easier to tighten it with an armorer's wrench for CA's case. I think there's not gas tube on it. So just removing the ras would give you access to the barrel nut and tighten.
Things would be a bit complicated if there's a gastube installed. Have to remove the front sight, remove gas tube and tighten...then align the gas tube hole with the barrel nut.

If you ever come across brampton, PM me we'll tighten it.

October 11th, 2010, 16:15	#4
ybrik Trader rating Join Date: Jun 2007 Location: Ontario, Canada	Actually it's much easier to tighten it with an armorer's wrench for CA's case. I think there's not gas tube on it. So just removing the ras would give you access to the barrel nut and tighten. Things would be a bit complicated if there's a gastube installed. Have to remove the front sight, remove gas tube and tighten...then align the gas tube hole with the barrel nut. If you ever come across brampton, PM me we'll tighten it. __________________ 5.56x45mm + m27 = M249(SAW)