Airsoft Canada - View Single Post

SniperSam · September 24th, 2010, 16:06

Is it the VFC Scar L CQC? I had a problem just like that, after about 100 or so rounds of firing, it'd just stop. Turns out that a very tiny piece was spinning around and after 100 some odd rounds of firing, it'd fall into the trigger part. We took it apart, and took the broken piece out. It solved my problem, I'd do a quick check at the internals, sometimes if an AEG is shaken around a lot, pieces come undone, no matter how good the quality
(In my experience, im no expert, but it's worth looking into)

September 24th, 2010, 16:06	#2
SniperSam Trader rating Join Date: Sep 2010 Location: Edmonton, AB	Is it the VFC Scar L CQC? I had a problem just like that, after about 100 or so rounds of firing, it'd just stop. Turns out that a very tiny piece was spinning around and after 100 some odd rounds of firing, it'd fall into the trigger part. We took it apart, and took the broken piece out. It solved my problem, I'd do a quick check at the internals, sometimes if an AEG is shaken around a lot, pieces come undone, no matter how good the quality (In my experience, im no expert, but it's worth looking into) __________________ Proud Member of the Strelok society Whoa guy with the thumb rings, save some pussy for the rest of us Welcome to Bed Bath and Beyoncé, if you find anything you like, put a ring on it. What idiot called them Black Bears instead of African Abearicans