Airsoft Canada - View Single Post - HFC M190 Now its Safety problem

Mart83 · August 2nd, 2010, 23:39

Hello!

So, I've put my hand on a HFC M190 for cheap (was meant as a fixer) just so I can learn GBB mechanical a bit.

I've come to fix one of the few problem it had: Cocking and shooting was absolutely doing nothing. I disassembled and reassembled the whole pistol founding there was a little missplaced spring resulting in doing an unproper job with the "pin" (what's the name of this part?) that hits the magazine valve. So I've come to a new step; the pin now hits the valve.

>>SOLVED<< Well, long story short when it hits the valve all the gas simply release like a big "ppphhhssssss..." on both magazine. And I've done my test without the slide on.

Anyway, please explain me >>SOLVED<< for that prolem
Thank

August 2nd, 2010, 23:39	#1
Mart83 Loves Justin Bieber ♥ Trader rating Join Date: Aug 2008 Location: St-Jerome	HFC M190 Now its Safety problem - Mag Problem = Solved Hello! So, I've put my hand on a HFC M190 for cheap (was meant as a fixer) just so I can learn GBB mechanical a bit. I've come to fix one of the few problem it had: Cocking and shooting was absolutely doing nothing. I disassembled and reassembled the whole pistol founding there was a little missplaced spring resulting in doing an unproper job with the "pin" (what's the name of this part?) that hits the magazine valve. So I've come to a new step; the pin now hits the valve. >>SOLVED<< Well, long story short when it hits the valve all the gas simply release like a big "ppphhhssssss..." on both magazine. And I've done my test without the slide on. Anyway, please explain me >>SOLVED<< for that prolem Thank __________________ "La perfection n'existe pas, l'excellence oui" Sent from my Cyrix 486DX2-50 using mIRC 2.1a using 14.4K USRobotic dial-up modem. Last edited by Mart83; August 3rd, 2010 at 17:23..