Airsoft Canada - View Single Post

m102404 · June 28th, 2010, 15:18

Use a lathe...and a sharp tool bit.

You will have issues with chipping the finish.

You're better off going with a non-coated barrel if you're going to cut it.

June 28th, 2010, 15:18	#12
m102404 Tys Trader rating Join Date: Apr 2006 Location: Toronto	Use a lathe...and a sharp tool bit. You will have issues with chipping the finish. You're better off going with a non-coated barrel if you're going to cut it.