Airsoft Canada - View Single Post - Problems with VSR-10

Jake_188 · June 2nd, 2010, 02:59

Recently ive encountered a serious problem with the firing mechanism within the VSR-10 Airsoft rifle.

pulling back the bolt of the sniper initiates the problem. From this point on the bolt will not return back to its rest position to close the chamber. It is difficult for the bolt to be caught, and while trying to force the bolt to close, the sear seems to release and it closes shut.

ive taken apart the rifle and inspected the first and second sear and piston from the bolt, and there seems to be no damage at all whatsoever to either instruments. I cannot visibly see the problem but it persists. Upon putting the rifle together, it fired once again worry free for about 10 rounds before acting up once again.

I need dire help with this situation and ASAP. What needs to be done to correct this?

June 2nd, 2010, 02:59	#1
Jake_188 Trader rating Join Date: Mar 2009 Location: GTA, Ontario	Problems with VSR-10 Recently ive encountered a serious problem with the firing mechanism within the VSR-10 Airsoft rifle. pulling back the bolt of the sniper initiates the problem. From this point on the bolt will not return back to its rest position to close the chamber. It is difficult for the bolt to be caught, and while trying to force the bolt to close, the sear seems to release and it closes shut. ive taken apart the rifle and inspected the first and second sear and piston from the bolt, and there seems to be no damage at all whatsoever to either instruments. I cannot visibly see the problem but it persists. Upon putting the rifle together, it fired once again worry free for about 10 rounds before acting up once again. I need dire help with this situation and ASAP. What needs to be done to correct this?