Airsoft Canada - View Single Post

HaZarD SFD · May 27th, 2010, 13:42

DONT SWAP OUT ICS HOPUP.. Buy a NEW one of mach1.. trust me.. modifying and other shit isnt worth your time and can be a pain and it may not work..

ICS hopup is made for the ICS and should be the only one used.. If your thinking its the nozzle shave the raised edge on the middle of the nozzle to a sloped angle i.e from | to / well add more of an angle to it.. Hope its understandable..

That raised edge can get caught on the opening of the hopup unit and this does happen with other brands as well. It just lets the nozzle slide in better and it wont get hung up.. still gives airseal as your not changing the whole diameter of the raised part..

I know ICS 100% in and out.. Trust me.

May 27th, 2010, 13:42	#13
HaZarD SFD Trader rating Join Date: Sep 2005 Location: Ottawa	DONT SWAP OUT ICS HOPUP.. Buy a NEW one of mach1.. trust me.. modifying and other shit isnt worth your time and can be a pain and it may not work.. ICS hopup is made for the ICS and should be the only one used.. If your thinking its the nozzle shave the raised edge on the middle of the nozzle to a sloped angle i.e from \| to / well add more of an angle to it.. Hope its understandable.. That raised edge can get caught on the opening of the hopup unit and this does happen with other brands as well. It just lets the nozzle slide in better and it wont get hung up.. still gives airseal as your not changing the whole diameter of the raised part.. I know ICS 100% in and out.. Trust me. __________________ No Comment.