Quote:
Originally Posted by Halestormx
Hello everyone I am looking to do some light upgrades to my VFC scar H.
I would like to up the FPS from arounf 350. to about 425 fps or so.
the current configuration is pure stock. so what would be some good part to look for and install to get about another 75fps. spring, piston head, nozzel etc... .
also if i get a new spring like maybe a M120 will i need to do some reinforcment for the rest of the internals.
so what i would like to hear is what parts i need to get the 425fps and what parts i will need to keep the shots consistant and the gun durable.
thanks in advance everyone.
|
To answer your question will be a spring swap of M120, Bore up cylinder, torque gears and pistons
But........
if you want your gun to be durable keep it under 400fps (around 375 - 380fps is more than enough for the barrel length you have) there are so many combination that you can do to make your VFC AEG shooting sexy but at the target 425fps you will likely be rejected from games, here in Ontario average field limits are 400fps with Some that will allow a little higher.
From experience 400+fps AEG will not last long doesn't matter what you do to it, especially if you are the run and gun type with full auto. Sorbo pads can only delay the fatigue in your gears and piston, at 400+fps teh first thing to go in your AEG even with an upgraded gear will be your piston then it will be your gears then maybe your switch assembly and so forth, you will end up going down the airsoft money pit where it has claimed many victims.
My King Arms FAL has been going strong now for two years without any issue or modifications, the only mods were for the nozzle and spring guide, it will outshoot most conventional AEG out there in the field.