Airsoft Canada - View Single Post

MP5HERO · April 12th, 2010, 22:27

ok. so in short my problem seems to be that the motor is not turning the gears. the motors i have tested both are turning properly but when they are connected to the gearbox it seems as though the motor is being locked up. i can hear it trying to turn but it just wont. the spring in the mechbox was tested at about 350 fps previously so i dont think it is too heavy to be turned. any common problems this could result from? any solutions?

April 12th, 2010, 22:27	#1
MP5HERO Trader rating Join Date: Nov 2008 Location: winterpeg mb	problems with m4 gearbox ok. so in short my problem seems to be that the motor is not turning the gears. the motors i have tested both are turning properly but when they are connected to the gearbox it seems as though the motor is being locked up. i can hear it trying to turn but it just wont. the spring in the mechbox was tested at about 350 fps previously so i dont think it is too heavy to be turned. any common problems this could result from? any solutions? __________________ Loves me some CQB