|
Put a drop of silicone oil on the fill valve, give it a little shot of gas (like 0.5-1sec). Repeat 2-3 times. It's ok if the gas is leaking out...it'll be driving oil right to the seal.
Let it do that a bit.
Take the base plate off the mag, there will be a + screw on the bottom. Tighten that. Don't go Hulk on it, just tight. You might/should hear the gas stop leaking....if so, you're good to go and be sure to use a bit of oil in your gas.
(most green gas cans have oil added.....if you're using a propane camping bottle it does not)
|