[MikeMcNair]

Originally Posted by safx

DON'T DO IT!!
...............
and
polishing takes anywhere
from 4–12hrs, what is your
time worth man! Fagetboutid!

sorry to contradict you, but you are wrong.

i did this, in 17 minutes two nights ago.

from this...........



to this..............







i started with a "sand paper foam block" from home depot to get the paint off, and since it is foam, it gets the nooks and crannies well.

then, 600 grit, in the same direction (as changing directions will provide unfavorable swirls)

then 1000 grit, again, in one direction (back and forth if you must)

then, a fast wipe down with fine steel wool, and BAM, done. i can see myself in it.

now, if you really what a FULL MIRROR shine, use 2000 grit and wetsand it with WD-40 as a water replacement.

i have polished MANY different things, and my process is fast, and VERY effective.


see post # 135 here.... http://www.airsoftcanada.com/showthr...t=82506&page=9





from a post in the link in my sig, posted July 8th 2009.....

Originally Posted by MikeMcNair

well, i have been bored since i cant plink around with this thing, so i polished the barrel, i kinda like it

here it is compared to the G26C non polished.........















......