Quote:
Originally Posted by Soulfly
Fuse, or Your spur gear shaft probably snapped in half.
Send your gun to a gun doc. Get them to check it out.
|
Would still have the motor turning or at least torquing in the grip.
Wiring or fuse as stated. TM G36s tend to have the fuse in the foregrip, I'd assume most other G36 brands do also. Meter, set to beep, attach one to the red wire on the motor, the other to where the red is on the battery connector, pull trigger. If it beeps, wiring is good. Then touch both ends to the black ends of the wiring, same as above except no need to pull trigger, if beeps then it's good too. If the red doesn't beep, then the fuse is blown, or somewhere in the path is cut. If it just stopped working on you without any internal interferance from you (such as opening the mechbox up, or upgrades), then only thing would be the fuse blew, replace with a suitable or slightly higher current fuse (like a 20A) and see if it works then.