Quote:
Originally Posted by ILLusion
That more or less looks okay... the trigger disconnect lever (the silver part) should be more vertical. IE, the bottom point should be facing towards the 6:00 position, rather than at the 5:00 position it's pointing to now.
The part that sticks out at a right angle (towards your face) should actually sit to the LEFT of the sear. So when you picture the trigger stirrup in place, the stirrup will contact the silver part, which will in turn push the sear to release the hammer.
See my post right above yours.
|
I know the problem is fixed, but I still have one question. Is that how the disconnector lever naturally sits? When I took apart my stock MEU that's what it looked like on the inside.