Quote:
Originally Posted by Soulfly
Take it apart with some C-clip pliers, and Oil the shit out of it.
When it gets cold, The rubber seal gets a bit too stiff, and it doesn't slide along the nozzle very well.
I tried to 'drill' out the hole a bit bigger, but it didn't work. I just lubed it up, and about every 10-15 fills, I take it apart and lube it all up again, and stretch the rubber around..
|
Thanks alot, did you have the same problem? And did the nozzle on yours not retract back into the adaptor unless forced back in?
Thanks