Airsoft Canada - View Single Post

Qlong · August 30th, 2009, 23:29

Should not be a problem, the issue was with the different type of treading on the barrel nut, as long as you are using a G&P nut on the G&P body it should be fine.

August 30th, 2009, 23:29	#2
Qlong Division Trader rating Join Date: Jun 2007 Location: Scarborough, Ontario	Should not be a problem, the issue was with the different type of treading on the barrel nut, as long as you are using a G&P nut on the G&P body it should be fine. __________________ Weee!