Airsoft Canada - View Single Post - Very strange G36 pistol grip electrical glitch

deep in the bush · July 11th, 2009, 17:23

I checked all wiring and it turned out to be a dirty little connector inside the trigger assembly.

It can also be the wires getting pinched in the handle as you reload. Make sure the wires are in the correct grooves in the handle above the motor. There are two small gaps for the wire to run through.

I hope this helps too.

July 11th, 2009, 17:23	#8
deep in the bush Monkey with a Gun Trader rating Join Date: Jul 2005 Location: Barrie	I had same issue then replaced the trigger assembly I checked all wiring and it turned out to be a dirty little connector inside the trigger assembly. It can also be the wires getting pinched in the handle as you reload. Make sure the wires are in the correct grooves in the handle above the motor. There are two small gaps for the wire to run through. I hope this helps too. __________________ "Anyone who has the power to make you believe absurdities has the power to make you commit injustices." Voltaire AV for Barrie, Orillia, Innisfil, Bradford Region - pm me if you need AV'd I'm the Barrie Bastard. http://www.bbbastard.com/ Cheese is good.