|
Mach1 Just asked me to send it back, however M102404 Helped me look in the gearbox and maybe this can help other people. this is what he told me
So...with the rifle open and the upper mechbox out, when you pull the trigger the lower mechbox cycles right?
- but it sounds horribly loud?
Motor height adjustment is done like this.
1. Screw the adjust all the way in...don't torque hard on it
2. Unscrew it two full turns, fire a semi shot
3. Keep unscrewing it by half turns...you're aiming for the quietest/"dullest" shot sound.
4. Then go 1/4 turns in or out to fine tune
At it's dullest sound (some setups are noisy anyways, others are deadly quiet)...that's the proper engagement.
When you shoot in semi...does the sector gear (the one that engages the upper piston) stop spinning on it's own...or does it keep going until you let go of the trigger?
With the upper closed...does the piston actually get pulled back and released? You should be able to hear/feel the "thunk/whap" of the piston hitting forward...with or without a bb coming out.
Thanks M102404!!
|