Airsoft Canada - View Single Post

Crunchmeister · June 3rd, 2009, 14:19

The wear on the teeth is all on one side of the teeth instead of the centre where the gears should contact. And it's the same side of the piston that is cracked. My first guess was it wasn't correctly installed into the rails in the mechbox. Not having seen how it was sitting in the shell after failure, I can't say for sure, but that's what it looks like. And if titanium teeth suffered this much damage, chances are the teeth on your sector gear have been damaged too.

June 3rd, 2009, 14:19	#2
Crunchmeister Trader rating Join Date: Nov 2007 Location: In your bedroom going though your underwear drawer	The wear on the teeth is all on one side of the teeth instead of the centre where the gears should contact. And it's the same side of the piston that is cracked. My first guess was it wasn't correctly installed into the rails in the mechbox. Not having seen how it was sitting in the shell after failure, I can't say for sure, but that's what it looks like. And if titanium teeth suffered this much damage, chances are the teeth on your sector gear have been damaged too. __________________ Last edited by Crunchmeister; June 3rd, 2009 at 17:39..