Airsoft Canada - battery question

Airsoft Canada (https://airsoftcanada.com/forums.php)

- Doctor's Corner (https://airsoftcanada.com/forumdisplay.php?f=18)

- - battery question (https://airsoftcanada.com/showthread.php?t=97658)

C.O.B.R.A. SNAKE

January 28th, 2010 16:16

battery question

I have an a&k m60 and i was wondering if it is ok to use li-po batteries I use a 11.1v 1200mah just for plinking around the house. I am just not sure if it will hurt the gun at all. thanks

CDN_Stalker

January 28th, 2010 16:35

Lol, you PLINK around the house with an M60?!?!?! That's hilarious!!!!

theguy

January 28th, 2010 16:46

Is it one of the A&K M60 variants with the controllable voltage dial?

Con Murder

January 28th, 2010 16:50

The only A&K I had apart was less than impressive, from the spring guide to the tappet plate I could only hope the plastic wouldn't shatter with the smallest strain. Can it handle a lipo? Probably. For how long? Until it breaks. How long till it breaks? From 1-10,000 shots.

C.O.B.R.A. SNAKE

January 28th, 2010 17:13

there is no voltage dial on it

Wantabe_Warrior

December 23rd, 2010 10:56

what about the ones with the RoF dial?

ThunderCactus

December 23rd, 2010 15:11

Quote:

Originally Posted by CDN_Stalker (Post 1152291)

Lol, you PLINK around the house with an M60?!?!?! That's hilarious!!!!

It's for shooting swinging beer caps ;) LOL

All times are GMT -4. The time now is 16:49.