ICS m4 rifle problem.
 

Greetings ASC,
I have posted a few threadsin these forums concerning my ICS m4 in the psat but have not been able to put my finger on the problem quite yet.

Her's the breakdown:
1) I recieve my brand new rifle works decently
2)through in a modify m110 spring
3) I do a 10-15 ultra noob burst on a pop can in an attempt to rip the can in two.
4) my gun stopped firing so I press the AR latch, 2 shots that the same thing.

Now after several months of replacing this and that, re shimming and adjusting the motor height,nothing.

I knnow of a post by a previous member named "VIRAL" he had every problem I have including the gun firing when spliting the 2 mechbox's,jamming, sparks in the trigger swich and so on.Unfortunately he has been banned so I thought I would post this and pray one of you may hold the answer to my problem.

I'm thinking maybe trigger switch assembly??

Thanks alot!

BUMP!

Seriously ? Sparks from the trigger? Whoah man you got an massive electrical issue Yes i would look at the trigger assembly first and work your way back with new wire. As far as the locking up i know a buddies ICS literally bent a spring inside the mechbox turns out it was a shitty spring look at it see if it looks bent.

yeah its nothing to do with the upper at all and with the gear box in two I can see sparks on the trigger contacts when I pull the trigger..