Make a B.F.G., Mr. Bucket!
 

http://www.air-sharp.com/A-t3_gun_M2drum_mag_0005.jpg
Me, working. Really. Professional Envelope-Pusher.
http://www.air-sharp.com/A-t3_gun_M2drum_mag_0004.jpg
A: AA battery holder, four cells = 6v.
B: Relay-connects 6v to red/black wire pair when gun is fired.
C: Hopup with 14 candelas' worth of blue LED's.
D: Fire control, not yet wired in this shot.
E: Fiberglass .50's!

This is wired so that if you pull the trigger, the AEG motor, the ammodrive, and the HUTU (Google THAT!) all receive power. I may add a button to pre-wind the ammo, but there's actually a very short feed path in this thing.

http://www.air-sharp.com/A-t3_gun_M2...crosshairs.jpg
Laser crosshairs test-crummy nite mode on camera.

http://www.air-sharp.com/A-t3_gun_M2drum_mag_0007.jpg
Them two DooHickeys on top of the barrel are laser-line generators: one vert, the other horiz.

http://www.air-sharp.com/A-t3_gun_M2drum_mag_0008.jpg
Travel sticker reads "Visit the Tannhauser Gate- Where Memories Are Made" (tip o' the hat to Rutger Hauer).

http://www.air-sharp.com/A-t3_gun_M2drum_mag_0009.jpg
Top view: Handles are turned oak, body on this one is about half PVC/half ABS. -"Light" at 10.6lbs, 42" overall.

every try to make a shotgun that fired m203's instead of shotgun shells?

Totally badass. I vote you have your own section on here!

Been done, Google it!


The 1919 version:
http://www.air-sharp.com/T3_Case1.jpg

http://www.air-sharp.com/T3_Case2.jpg

http://www.air-sharp.com/T3_Case3.jpg

http://www.air-sharp.com/T3_Case4.jpg

http://groups.google.com/group/killb...-minions?hl=en
Join up now, seniority's gonna count!