WE high capa 5.1 dragon auto fire problem
 

so i just bought this gun used and im wondering what the cause could be for it shooting in full auto randomly, is something getting stuck which causes it to keep going?. Some shots go off normally, and then it will just take 3-4 shots in a row uncontrolled. What could be causing this to happen?

worn down trigger sears.

Common issue for dragons about 3 years ago.

Can be fixed by changing the sears.

any info on how to do this would be greatly appreciated, what parts i'd need ect, i've never worked with a gbb befor

It also sounds like a worn sear or worn hammer to me.

It is not recommended to change one of those components alone.

It is best recommended to change both the sear and hammer to the same material at the same time.

You can change just the sear for now and run it for a while, but eventually, the hooks on the hammer will also wear down. And vice versa.

If you've never worked on a gbb before and are mechanically adverse, the best idea would be to send the gun to a mechanic who knows what he is doing.

im very good with mechanical stuff, i just need to be pointed in the right direction. I've already had the gun dissassembled and im just wondering where i could get the parts im looking for

I have them all. Just let me know what parts you need. They're all listed in my sales thread.