Single shot only with a AEG
 

HI !

I'm looking to make a AEG (v2 gb) shoot only in semi auto.

I'm pretty shure it has something to do with the cut off lever but i'm not shure how to do it.

Thank's

Get a Trigger Master MOSFET. You can program it so your gun fires single shot only.

Thank's but that is not the type of solution that i'm looking for.

if it's the only one suggested thne i'll look at it.

The selector plate works by pushing the cut-off lever back out of position when the selector is rotated.

If you cut/trim out the notch on the selector plate, so that it doesn't touch the cut off lever when in the full auto position...it won't push the lever back, which will result in semi-only, regardless of selector lever position.

It's obviously a one-way change. Once done, the only way to undo-it is to replace the selector plate.

It can be done with a sharp knife (i.e. xacto) and you don't need to disassemble the mechbox to do it.

Good luck,

Tys

What I like to do is block the selector from going to full-auto by tapping a hole in the metal body and putting a set screw.

So if your gun jams, just remove the set screw, fire a few shots in full-auto and your are good.

This is a second option...just choose what feels right to you.


Cheers