Airsoft Canada - New problem, haven't come across this before..

Airsoft Canada (https://airsoftcanada.com/forums.php)

- Newbie Tank (https://airsoftcanada.com/forumdisplay.php?f=203)

- - New problem, haven't come across this before.. (https://airsoftcanada.com/showthread.php?t=83272)

narajms

May 26th, 2009 04:25

New problem, haven't come across this before..

So I'm currently using a TM VSR 10 G-Spec at 1.5 Joules, and after modding it to 1.5 (previously 0.8) now when I pull the spring (bolt) a bullet falls out of the barrel before i get a chance to shoot. Any suggestions? :(

zone 69

May 26th, 2009 04:37

Take a look at your hopup rubber it may just need an ajustment.

Fiya	May 26th, 2009 09:03

I've heard of something like this with some AEG's. I've read that they just had to turn the hop-up slightly to alleviate the problem. I'm not sure if that would fix it, but its worth a try.

pusangani

May 26th, 2009 10:14

Quote:

Originally Posted by Fiya (Post 994819)

I've heard of something like this with some AEG's. I've read that they just had to turn the hop-up slightly to alleviate the problem. I'm not sure if that would fix it, but its worth a try.

had that happen in an aeg whose rubber wasnt sitting properly as well.

coach

May 26th, 2009 12:06

Quote:

Originally Posted by narajms (Post 994785)

So I'm currently using a TM VSR 10 G-Spec at 1.5 Joules, and after modding it to 1.5 (previously 0.8) now when I pull the spring (bolt) a bullet falls out of the barrel before i get a chance to shoot. Any suggestions? :(

well that's your problem right there! bullets don't work too well with airsoft.

but ya. probably your hopup

All times are GMT -4. The time now is 18:08.