VSR-10 Zero Trigger Jammed
 

Hi! I've been wondering why my TM VSR-10 G-Spec's bolt doesnt lock.

The Zero Trigger was jammed. I took out the bolt/cylinder to test it.
I pushed the sear then pulled the trigger. It folded backwards, but it stayed folded. It doesnt naturally go back unless I pull the sear back manually. Sometimes it does this and sometimes it doesnt.

First when I got the ZT, I took it all apart because I didnt know how to put it on my gun. I was able to put it on my gun then I figured out how to put it on the right way :confused:. I think I put it back together correctly, but the bolt pull was rough.

I took it apart and put back together again to try to solve rough bolt pull and It started not locking.

How do Solve this problem? Anyone know if and what part of ZT I put on wrong?

This is the third topic you've made on the same subject. Please only make one thread, and you could try PM'ing a gun doctor if you don't get the answers you want.

By the sounds of it you've got a spring reversed inside your zero trigger.

Wat do you mean by reversed? Like i put the back end of the spring wer the front end should b? Or put in a different spot on the trigger? Or i switched the 2 springs lol?

I think by reversed he meant that one should be switched around. Like the front becomes the back, and vice versa.

That cant be. I never took apart the objects holding the springs. Must b something else. Any1 have any other ideas?

borrow one that works or find pictures of one that's been opened and see what's different.

I have been searching for pics of it open all over, but can't find a single one. If any1 has pictures of it open that would b awsome!

i found one but it was small and probably already deleted off the server and was just in the google cache. i'll see if i can find it tho

i found this but it's the original trigger box. no idea if it's the same under the hood:
http://img103.imageshack.us/img103/3...gerbox2kp9.jpg

Thx ALOT for trying, but lol the ZT is COMPLETELY different. It isnt meant to b taken apart.

well this is the one in the google cache i was talking about:
http://tbn2.google.com/images?q=tbn:...8118290029.jpg
i think the originals been deleted tho

Thx. Kinda too small and its not the vsr-10 one. But i mean u wer the only one who tried at least looking for it. I give u lots of credits haha.

I found a place in the zero trigger that you need to screw in with a one sided screwdriver or w/e. It didnt really work out in helping anything. My zero trigger is still messed up and STILL searching for answers, but cant find any.

Anyone else have any suggestions? :p