KSC G17 Metal Slide Upgrade Issues
 

Hi,

I just upgraded my KSC G17 to a G&P metal slide, and I have a few of issues that came up at the end of the upgrade.

1) Outer Barrel wobbles. The gun has an awful rattle to it now, any suggestions how to keep the barrel from wobbling?

2) Sights: The rear sight was easily transfered to from the old plastic slide to the new metal one, however, the front sight seems to be glued in to the plastic slide. Again, any suggestions on removing it? Or should I go for new sights?

3) The action (pulling the slide back) is far from smooth. Is it a matter of working it in, or just lubing it up, or something else?


Thanks!

The front site should have a screw inside the slide.

on a KSC? none of mine had screws and none were glued in either though.

Got the front sight off, it was glued on. I kind of mangled it in the process, and retailers carry sights?:banghead:

Airsoftparts.ca has replacement parts along with upgraded (metal i believe) sights.

Upgraded Sight http://www.airsoftparts.ca/store2/in...oducts_id=1142

Replacement Front Sight only http://www.airsoftparts.ca/store2/in...roducts_id=925

KSC Glocks front site dont have screws.

I have the same problem with the KSC Glock 19, im working on a solution and will keep you posted
The Trigger bar and hammer sear will give you problems in the future, just for a heads up!

Glue
 

I just ended up gluing the front site on, a couple dabs of super glue did the trick. Still have a rattle from the outer barrel.