removing Kraken hand guard
 

Alright, I'm in the process of making a custom wood kit for for my Kraken (I know, I know....) and I have removed the barrel and and hand grip from the upper reciever. I have removed the hop up and inner barrel from the outer barrel. I am however having trouble removing the od green grip from the barrel. Any advice/ or help?

I take you are talking about the AK47?

it just slides off after you have the front sight and gas tube screws unscrewed. if its still stuck after that just wiggle and jimmy it off

yah I was talking about the Ak47. I'm currently in the process of making it awesome for extreme tactics in a year. Thanks Dusti, that helped alot!! now I can take the proper measurements.

if you want to dismantle all your gun there is a guide in english and french

http://btksoftair.piczo.com/krakenak47?cr=7

Lizander,

tou dont need to take off the front sight under screw.

wiggle out the fake cleaning rod.

under the lceaning rod there is a screw that is below that gas tube, take it off.

once u take off the screw, slide everything forward and take the handguard off.

Borden stop off-tracking and go back to studying.