Airsoft Canada

Airsoft Canada (https://airsoftcanada.com/forums.php)
-   Upgrades & Modifications (https://airsoftcanada.com/forumdisplay.php?f=24)
-   -   RAS system for TM Aug (https://airsoftcanada.com/showthread.php?t=69224)

rocksteady October 17th, 2008 21:33

RAS system for TM Aug
 
Hey there I'm looking for the Action RAS system or something similar for a TM Aug A2. I've googled a bit to no such luck and have noticed that Redwolf is sold out as well.

Any suggestions/help? Thanks in advance.

Kos-Mos October 17th, 2008 21:45

They don't make them anymore.

Good luck finding one.

You might have to get a JG AUG A3 and strip it from there (that's what I plan to do).

The quality is less, but this is the most viable option.

Deadpool October 18th, 2008 08:38

You could always buy a JG AUG A3 and put your internals in it. It's about the same price! ;)

Muffin October 18th, 2008 09:09

Or get one of those sexy Phantom kits.

rocksteady October 18th, 2008 11:12

Took a couple solid hours of searching but I have found an RAS kit... unfortunately it's the sniper version so here's a few questions for you guys:

1) Can I use the stock barrel with the RAS receiver addition?

2) Am I going to have any problems with CBSA if I bring this up from the states?

Muffin October 18th, 2008 11:22

Quote:

Originally Posted by rocksteady (Post 842694)
Took a couple solid hours of searching but I have found an RAS kit... unfortunately it's the sniper version so here's a few questions for you guys:

1) Can I use the stock barrel with the RAS receiver addition?

2) Am I going to have any problems with CBSA if I bring this up from the states?

1) Yes, unless it states otherwise. Give a link to the RAS your talking about.

2)No.

IRONSIGHT October 18th, 2008 11:49

The only difference between the two kits is the barrel and you can use the stock one.

On importing one, you'll just have to pay duty on whatever price is marked on the package. (expect to pay $30-40. for something worth $250.-300.

Voodoo October 20th, 2008 19:15

phantoms are soo ugly, and the design is flawed. It is only held on by set screws and will eventually fall off.


All times are GMT -4. The time now is 16:55.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.